The GA-EP45-UD3P introduces revolutionary Gigabyte Ultra Durable 3 technology featuring a 2 oz copper PCB to help reduce system temperature and dramatically enhance performance. Based on the Intel P45 chipset the GA-EP45-UD3P delivers a record-setting 1600MHz FSB for the Intel Core 2 multi-core processors, and supports dual channel DDR2 memory at speeds of up to 1366MHz and even higher. The GA-EP45-UD3P boasts dual PCI Express 2.0 VGA card slots for ATI CrossFireX support with ultra smooth 3D rendering and blazingly-fast frame rates. Additionally, the board incorporates Gigabyte DES Advanced technology for industry leading energy saving and enhanced system efficiency.
* CPU:
- Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium Dual-Core processor/Intel Celeron processor in the LGA 775 package
Refer to "CPU Support List" for more information.
- L2 cache varies with CPU
* Front Side Bus: 1600/1333/1066/800 MHz FSB
* Chipset:
- North Bridge: Intel P45 Express Chipset
- South Bridge: Intel ICH10
* Memory:
- 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
- Dual channel memory architecture
- Support for DDR2 1366+/1066/800/667 MHz memory modules (Go to GIGABYTE's website for the latest memory support list.)
* Audio:
- Realtek ALC889A codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for Dolby Home Theater
- Support for S/PDIF In/Out
- Support for CD In
* LAN: Realtek 8111C chip (10/100/1000 Mbit)
* Expansion Slots:
- 1 x PCI Express x16 slot, running at x16
- 1 x PCI Express x16 slot, running at x8 (The PCIEx16 and PCIEx8 slots support ATI CrossFireX technology and conform to PCI Express 2.0 standard.)
- 3 x PCI Express x1 slots
- 2 x PCI slots
* Storage Interface:
- South Bridge: 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices, Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
- GIGABYTE SATA2 chip: 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices, 2 x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3Gb/s devices, Support for SATA RAID 0, RAID 1 and JBOD.
- iTE IT8718 chip: 1 x floppy disk drive connector supporting up to 1 floppy disk drive
* IEEE 1394a:
- T.I. TSB43AB23 chip
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
* USB:
- Integrated in the South Bridge
- Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
* Internal I/O Connectors:
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 1 x floppy disk drive connector
- 1 x IDE connector
- 8 x SATA 3Gb/s connectors
- 1 x CPU fan header
- 2 x system fan headers
- 1 x power fan header
- 1 x front panel header
- 1 x front panel audio header
- 1 x CD In connector
- 1 x S/PDIF In header
- 1 x S/PDIF Out header
- 2 x USB 2.0/1.1 headers
- 1 x IEEE 1394a header
- 1 x parallel port header
- 1 x serial port header
- 1 x power LED header
- 1 x chassis intrusion header
* Back Panel Connectors:
- 1 x PS/2 keyboard port
- 1 x PS/2 mouse port
- 1 x coaxial S/PDIF Out connector
- 1 x optical S/PDIF Out connector
- 8 x USB 2.0/1.1 ports
- 2 x IEEE 1394a ports
- 2 x RJ-45 ports
- 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
* I/O Controller: iTE IT8718 chip
* H/W Monitoring:
- System voltage detection
- CPU/System temperature detection
- CPU/System/Power fan speed detection
- CPU overheating warning
- CPU/System/Power fan fail warning
- CPU/System fan speed control
* BIOS:
- 2 x 8 Mbit flash
- Use of licensed AWARD BIOS
- Support for DualBIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
* Bundle Software: Norton Internet Security (OEM version)
* Operating System: Support for Microsoft Windows Vista/XP
* Form Factor: ATX Form Factor; 30.5cm x 24.4cm
0 comments:
Post a Comment